Links
BUY NOW
CALL FREE
0808 202 7303
CALL FREE
0808 202 7303
FREEPHONE 0808 202 7303
Telephone: +44 (0)1208 264999
Fax: +44 (0)1208 264998
email: info@reactiveresins.com
Telephone: +44 (0)1208 264999
Fax: +44 (0)1208 264998
email: info@reactiveresins.com
The ceramic micro-spheres are extremely hard, totally inert and are impervious to liquids and gases. Their perfectly spherical shape and graded sizes enable very high packing densities to be achieved thus increasing the abrasion resistance of the coating.
CERAMIC FILLED EPOXY FLOOR COATING
Ideal for factory, warehouse and garage floors and much more...
The product to use if you don’t want to paint your floor again!
CONSEAL coatings cure to produce a semi- gloss to gloss finish that is sufficiently slip resistant for most dry situations. For wet areas or where maximum slip resistance is required, we have a selection of non-slip additives that can be added to the coating to produce a variety of textures.
CONSEAL LSC is easy to use and it can be applied with a roller or by high pressure airless spray equipment. Although CONSEAL LSC will provide good service if applied over conventional coatings it will last longer if it is applied directly to clean, sound substrates. Thick layers of old coatings are best removed with a scrabbler and single pack coatings together with oil and grease can be removed with STRIPPIT OFF oil & grease remover, followed be pressure washing.
Two coats are usually sufficient on non porous substrates but new concrete should be primed with one coat of CONSEAL P and timber with Timberseal P.
CONSEAL LSC is easy to use and it can be applied with a roller or by high pressure airless spray equipment. Although CONSEAL LSC will provide good service if applied over conventional coatings it will last longer if it is applied directly to clean, sound substrates. Thick layers of old coatings are best removed with a scrabbler and single pack coatings together with oil and grease can be removed with STRIPPIT OFF oil & grease remover, followed be pressure washing.
Two coats are usually sufficient on non porous substrates but new concrete should be primed with one coat of CONSEAL P and timber with Timberseal P.
CONSEAL LSC is a ceramic filled epoxy floor coating that has exception wear and abrasion resistance. It is ideal for use on any floor where maximum durability is required.
- Probably the hardest wearing floor coating available
- Easy to apply
- Tremendous adhesion, even to poorly prepared substrates
- Long lasting, eliminates frequent re-coating - saving you time and money
CONSEAL LSC is a two part epoxy coating that contains a small amount of solvent that enables the highest amount of ceramic micro-spheres to be incorporated into the product thus making it the hardest wearing epoxy floor coating available.
CONSEAL LSC contains a large amount of microscopic ceramic micro-spheres which impart tremendous abrasion resistance to the cured coating. It has excellent opacity and covering power, is resistant to oil, petrol, diesel fuel, brake fluid and most chemicals, and has good resistance to sunlight.
CONSEAL coatings are supplied with different hardeners for the first and top coats. The first coat hardener adheres tenaciously to old substrates that are not perfectly prepared and the top coat hardener is resistant to sunlight and cures quickly to allow the floor to be put back into use within a day or so, depending on the ambient temperature. CONSEAL LSC can be applied in temperatures down to 8oC.
CONSEAL coatings are manufactured from the best quality raw materials under an ISO 9001 quality system. They are the result of considerable development work that has produced products of the highest durability, that are easy to apply and are unaffected by cold and damp during application. They can be applied in conditions that would prevent the successful application of many other coatings.
